Shop
Showing 289–293 of 293 results
-
Electronic Components, IoT & Wireless Boards, Microcontroller Boards
TTGO T-Call V1.4 ESP32 Wireless Module SIM Antenna SIM Card SIM800L Module Unsoldered
Electronic Components, IoT & Wireless Boards, Microcontroller BoardsTTGO T-Call V1.4 ESP32 Wireless Module SIM Antenna SIM Card SIM800L Module Unsoldered
- Chipset :ESPRESSIF-ESP32 240MHz Xtensa® single-/dual-core 32-bit LX6 microprocessor
- FLASH: QSPI flash 4MB / PSRAM 8MB
- SRAM:520 kB SRAM
- Button: Reset
- USB to TTL: CP2104
- Modular interface: UART,SPI,SDIO,I2C,PWM,TV PWM,I2S,IRGPIO
- On-board clock:40MHz crystal oscillator
- Working voltage:2.7V-3.6V
- Working current: About 70mA
SKU: ESP-1007 -
Electronic Components, Sensors
TTP223 Touch Sensor Module(Pack of 5)
- Input Voltage : 2 Volt – 5.5 Volts DC.
- The response time max ~ 60mS in fast mode, ~220mS at low power mode @VDD=3V.
- Sensitivity can adjust by the capacitance(0~50pF).
- Stable touching detection of the human body for replacing traditional direct switch key.
- Provides direct mode toggle mode by pad option(TOG pin).
- After power-on have about 0.5sec stable-time, during the time do not touch the keypad, and the function is disabled.
- Auto calibration and Re-calibration period is about 4.0 sec when the key has not be touched.
SKU: TBF4-006 -
-
Home Automation Project, Misc Projects, Projects For Sale
Universal IR Blaster
Specification:-
- Works on 5v Supply
- Can be powered using Type-C or Micro-USB Cable (Depending on the Variation Purchased)
- Consist of 5 IR LEDs For best Communication.
- Consists of IR Reciever For learning IR Remote Data.
- Comes With Pre-Installed CADIO Firmware
- Dimensions in mm(LBH) :-45x33x26
SKU: TCF1-003 -
Projects For Sale, USB to TTL Programmers
Universal TTL Auto Programmer
This single programmer will help you to program multiple microcontroller chips/boards. This board got dedicated slots for programming
- ESP32 Cam Board
- ESP32/ESP8266 Chip
- Arduino Pro mini
Along with that, it also got a dedicated pinout of a regular TTL programmer using which you can program almost all the microcontroller chips. This simplifies the programming of the Microcontroller significantly since no manual reset and boot mode selection is needed when using with a common USB to serial interface. It’s a must have tool for all IOT and Electronics Engineers.
SKU: n/a
