Shop
Showing 241–264 of 290 results
-
Electronic Components, Miscellaneous components
Female to Female Jumper Wires (20cm) – 40 Pieces pack
Electronic Components, Miscellaneous componentsFemale to Female Jumper Wires (20cm) – 40 Pieces pack
- 40P color DuPont line
- Length: 200mm
- Weight: 30 gm
- Compatible with 2.54mm spacing pin headers
- 40pcs chromatic female to female color jump wire
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
SKU: TAF1-005 -
HiLink Power Supply, Power Supply
Hi-Link HLK 20M12 12V/1.6A Switch Power Supply Module | HiLink Power Supply
HiLink Power Supply, Power SupplyHi-Link HLK 20M12 12V/1.6A Switch Power Supply Module | HiLink Power Supply
HLK-20M12 Hi-Link 12V 20W AC to DC Power Supply Module is a plastic enclosed PCB mounted isolated switching step-down power supply module. It can supply 12V DC from 100V AC and 240V AC and has a power rating of 20 watts. This makes it perfect for small projects that need a 12 volt supply from mains. There are many advantages to these modules, such as low-temperature rise, low power, high efficiency, high reliability, high-security isolation, etc.
SKU: TAF4-003 -
HiLink Power Supply, Power Supply
Hi-Link HLK-PM01 5V/600mA Switch Power Supply Module | HiLink Power Supply
HiLink Power Supply, Power SupplyHi-Link HLK-PM01 5V/600mA Switch Power Supply Module | HiLink Power Supply
220V AC to 5V DC, 600mA PCB Mounted Step-Down Power Supply Module
Features
- Meet UL, CE requirements,
- Ultra-thin, ultra-small
- All voltage input (AC: 90 ~ 264V)
- Low ripple and low noise
- Output overload and short circuit protection
- High efficiency, high power density
- The product is designed to meet the requirements of EMC and Safety Test
- Low power consumption, environmental protection, no-load loss <0.1W
SKU: TAF4-002 -
Electronic Components, Relays
Hongfa HF46F 5A SPST 5V PCB Sealed Subminiature Intermediate Power Relay(Pack of 5)
Electronic Components, RelaysHongfa HF46F 5A SPST 5V PCB Sealed Subminiature Intermediate Power Relay(Pack of 5)
Features
- Â 5A switching capability
- Â Meets VDE 0700, 0631 reinforce insulation
- Â Highly efficient magnetic circuit for high sensitivity: 200mW
- Â Extremely small footprint utilizing PCB area
SKU: TDF4-003 -
Displays, Electronic Components, LCD Display
I2C Module for 16×2 (1602) Character LCD
- 5V power supply.
- Serial I2C control of LCD display using PCF8574.
- Backlight can be enabled or disabled via a jumper on the board.
- Contrast control via a potentiometer.
- Can have 8 modules on a single I2C bus (change address via solder jumpers)address, allowing.
SKU: TAF3-005 -
ESP32 Based IoT Kit, IoT Kits
IoT Starter Kit Most Effective To learn
This IoT Starter Kit is a perfect kit for all those who want to kit start their journey with IoT regardless of any IoT Platform. This main component of this kit is ESP32 dev board which can be easily programmed with Arduino IDE, Micropython, ESP-IDF etc..
- Starter Kit for IoT
- Based on ESP32 dev-kit V1
- Comes With DHT11 Temperature Sensor, I2C OLED Display, and many other components
- Easy to Use
SKU: TCF4-001 -
Electronic Components, Motors & Motor Drivers
L293D Motor Driver Shield for Arduino
- 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
- 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, and internal kickback protection diodes.
- Can run motors on 4.5VDC to 25VDC.
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, or interleaved stepping.
SKU: TDF6-002 -
Motors & Motor Drivers
L298N 2A Based Motor Driver Module – Good Quality
- Current Sense for each motor.
- Heatsink for better performance.
- Power-On LED indicator.
- Double H bridge Drive Chip:Â L298N.
- Operating Voltage(VDC): 5~35
- Peak Current (A): 2
- Continuous Current (A): 0-36mA
- No. of Channels: 2
- Over-Current Protection (A): Yes
- Thermal Protection: Yes
SKU: TBF3-001 -
Electronic Components, IoT & Wireless Boards
LILYGO®TTGO T-Higrow ESP32wroom WiFi And Bluetooth Battery And DHT11 Soil Temperature And Humidity Photometric Electrolyte Sensor Fantastic Quality
Electronic Components, IoT & Wireless BoardsLILYGO®TTGO T-Higrow ESP32wroom WiFi And Bluetooth Battery And DHT11 Soil Temperature And Humidity Photometric Electrolyte Sensor Fantastic Quality
- Working current:150 mA
- Sleep current:Â 220 uA
- Working temperature range:-40℃ ~ +85℃
- Power Supply Input:USB 5V/1A
- Charging current:500mA
- Battery Input:3.7-4.2V
- Battery:3.7V lithium battery
SKU: TBF2-005 -
-
Electronic Components, Miscellaneous components
Male to Male Jumper Wires (20cm) – 40 Pieces pack
- 40P color DuPont line
- Length: 200mm
- Weight: 30 gm
- Compatible with 2.54mm spacing pin headers
- 40pcs chromatic male to male color jump wire
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
SKU: TAF1-004 -
Sensors, Electronic Components
MAX30102 PULSE OXIMETER HEART-RATE SENSOR MODULE GY-MAX30102
Specifications and Features:
- Optical sensor: IR and red LED combined with a photodetector
- Measures absorbance of pulsing blood
- I2C interface plus INT pin
- 3.3V power supply complete pulse oximeter and heart rate sensor solution, simplifies design, integrated LEDs, photo sensor, and
- high-performance analog front
- Ultra low power operation increases battery life for wearable devices
- Advanced functionality improves measurement performance, high SNR provides robust motion artifact resilience integrated
- ambient, light cancellation high sample rate capability fast data output capability
- It is an integrated pulse oximetry and heart rate monitor sensor solution.
SKU: TBF5-006 -
Electronic Components
MAX98357 I2S 3W Class D powerful Amplifier Interface Audio Decoder Module Filterless Board for Raspberry Pi, ESP32
Electronic ComponentsMAX98357 I2S 3W Class D powerful Amplifier Interface Audio Decoder Module Filterless Board for Raspberry Pi, ESP32
- Operating voltage: 2.7 – 5.5 V
- The I2S audio input supports 3.3V and 5V levels.
- using the gain input: 3dB, 6dB, 9dB, 12dB, and 15dBBy default
- 3.2W output at 10% THD
- Length: 20mm Width: 20mm Height: 3mm Approx Weight: 8gm
SKU: TAF6-004 -
Electronic Components, Miscellaneous components
MP3-TF-16P MP3 Disk TF Card Module
It’s a small and low-cost MP3 module player with a simplified output directly to the speaker. It can be used as a stand-alone module with an attached battery, speaker, and push buttons or used in combination with an Arduino UNO or any other with RX/TX capabilities.This perfectly integrates the hard decoding module, which supports common audio formats such as MP3, WAV, and WMA. Besides, this module also supports TF card with FAT16, FAT32 file system. Through a simple serial port, you can play the designated music without any other tedious underlying operations.SKU: TBF5-003
