Electronic Components
Showing 25–48 of 108 results
-
Electronic Components
9v Battery Snap Connector + DC Jack(Battery Connector Cap)
- Excellent Material.
- Fine workmanship.
- It is an environmental 9V battery buckle.
- T- fonts, with red and black connecting lines.
- Save power and protect the environment.
- Good electrical conductivity and comfortable sense of touch.
SKU: TFF5-004-1 -
Electronic Components, Voltage Regulator ICs
9V Voltage Regulator IC | L7809CV
- Fixed output voltage is 9V
- Output current is 0.5A
- Dropout voltage is 2V
- Maximum DC input voltage is 35V
- Output transition SOA protection
- Output voltage tolerance is 4%
- Operating temperature range 0°C to 125°C
SKU: TBF7-004-2 -
Electronic Components, Sensors
ACS712 20A Current Sensor Module Good Quality
- Low-noise analog signal path
- Device bandwidth is set via the new FILTER pin
- 5 µs output rise time in response to step input current
- Small footprint, low-profile SOIC8 package
- 2.1 kVRMS minimum isolation voltage from pins 1-4 to pins 5-8
- Supply Voltage: 4.5V~5.5V DC
- Measure Current Range: 20A
- Sensitivity: 100mV/A
SKU: TBF2-003 -
Electronic Components, Microcontroller Boards
Ai-Thinker VC-02-Kit | Best Offline Voice Recognition Board
Electronic Components, Microcontroller BoardsAi-Thinker VC-02-Kit | Best Offline Voice Recognition Board
Features:
- All GPIOs can be configured as external interrupt input and wake-up source
- One full-duplex UART with the maximum rate of 3Mbps
- Support I2C，DAC，PWM and multiple interfaces
- Built-in 242KB high-speed SRAM
- Built-in 2MB FLASH
- Support dual-channel DAC output
- 32bit RISC core, running at 240MHz
- Support DSP instruction set and FPU floating point operation unit
SKU: TDF1-004 -
-
-
Electronic Components, Sensors
EM-18 RFID READER MODULE
- Operating Voltage: 5V DC Supply
- Reading Distance: 6-10 cm.
- Read frequency: 125 kHz.
- EM4001 64–bit RFID tag compatible.
- 9600bps ASCII output.
- Current : <50 mA
- Operating Frequency: 125 kHz
- Read Distance: 5 cm
- Compatible Tags: 125KHz EM4100 Tags
- Size : 32mm(length) * 32mm(width) * 8mm(height)
SKU: TBF5-008 -
Electronic Components
EP24 Thermal Printer With Case 5V-9V compatible with ESP32/Arduino
- Low-noise direct thermal printing method
- Fast printing speed, low noise
- Can support Max.40MM (diameter) paper roll, around 16-20 meter. Optional serial interface (RS-232C, TTL) / USB port
- Rich of graphics / curves / characters print function
- Easy paper loading structure
- Support 5V-9V wide power voltage
SKU: TDF7-005 -
IoT & Wireless Boards, Electronic Components
ESP-12E: ESP8266 Serial Port WIFI Wireless Transceiver Module
IoT & Wireless Boards, Electronic ComponentsESP-12E: ESP8266 Serial Port WIFI Wireless Transceiver Module
- 802.11 b/g/n
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLL, regulators, DCXO and power management units
SKU: TAF7-005-1 -
-
-
Electronic Components, Miscellaneous components
INMP441 MEMS High Precision Omnidirectional Microphone Module I2S
Electronic Components, Miscellaneous componentsINMP441 MEMS High Precision Omnidirectional Microphone Module I2S
- Digital I2S interface with high-precision 24-bit data
- The high signal to noise ratio is 61 dBA
- High sensitivity – 26 dBFS
- Stable frequency response from 60 Hz to 15 kHz
- Low power consumption: low current consumption 1.4 mA
- High PSR: -75 dBFS
SKU: TAF6-006 -
-
-
Electronic Components, Power Supply
LM2596 HV DC-DC Buck Converter 4.5-40V to 3-35V Adjustable Step Down Module
Electronic Components, Power SupplyLM2596 HV DC-DC Buck Converter 4.5-40V to 3-35V Adjustable Step Down Module
- Input voltage: 4.5-40V,
- Output voltage: (3-35V) continuously adjustable (recommended load debugging).
- Minimum pressure: 1.5V
- Output current: rated current 2A, 3A maximum
- Output Power: 15W maximum
SKU: TBF5-002 -
Sensors, Electronic Components
LM393 Photosensitive Light-Dependent Control Sensor LDR Module
- LDR module 4 PIN
- Operating voltage 3.3V-5V
- Signal output indicator light.
- LDR module 4 PIN
- Able to detect ambient brightness and light intensity Adjustable sensitivity (via blue digital potentiometer adjustment)
SKU: TBF3-004 -
Sensors, Electronic Components
MQ 135 Air Quality/Gas Detector Sensor Module For Arduino
- Sensitivity to Ammonia, Sulphide, and Benzene steam
- Sensitive for benzene, alcohol, smoke
- Fast response and recovery
- Adjustable sensitivity
- Signal output indicator
- Output voltage boosts along with the concentration of the measured gases increases.
SKU: TBF3-006 -
Electronic Components
NEO-6M GPS Module with EPROM Best Qu
- 5Hz position update rate.
- The cold start time of 38 s and the Hot start time of 1 s.
- Configurable from 4800 Baud to 115200 Baud rates. (default 9600).
- SuperSense ® Indoor GPS: -162 dBm tracking sensitivity.
- Support SBAS (WAAS, EGNOS, MSAS, GAGAN).
- Separated 18 x 18mm GPS antenna.
SKU: TBF1-003 -
Electronic Components
NRF24L01 2.4GHz PA+LNA SMA Wireless Transceiver Module with Antenna
- It uses 2.4GHz global open ISM band, with license free.
- Transmit power is greater than +20 dBm.
- Support six-channel data reception.
- 2Mbit/s speed makes high-quality VoIP possible
- Multi-frequency points: 125 frequency points meet the needs of multi-point communications and frequency hopping.
- Low cost: integrated with high-speed signal processing parts associated with RF protocol, such as: automatically re-send lost packets and generate acknowledge signal;
- SPI interface facilitates the communication with MCU I/O port.
- Facilitate the development for customers, without development RF part.
- Software programming is fully compatible with NRF24L01 modules.
SKU: TDF2-005
