Hi-Link HLK 10M09 9V/1.1A Switch Power Supply Module | | HiLink Power Supply

About Hi-Link HLK 10M09

HLK-10M09 9 volts 10-watt compact plastic enclosed isolated Power Supply Module. HLK-10M09 from Hilink is an isolated switching step-down power supply module and can supply 9 volts DC from 120 Volts to 230 Volts AC input and has a power rating of 10 watts. This compact size power module makes it perfect to use in places where size is a constraint. HLK AC to DC power supply modules is a compact PCB mountable plastic enclosed power supply module. HLK-10M09 Power Supply Module replaces lots of parts from the traditional power supply like diodes, voltage regulators, and transformers.

Specifications 

Product Features

• Wide range input                                      85-264VAC/70-350VDC
• Input and output isolation voltage           3000VAC
• No-load power consumption                   ≤0.1W
• Working temperature range                     -25℃
• Fully enclosed plastic housing, in keeping with UL94V-0 level
• High output short circuit and over-current protection and self recovery glue potting, dustproof, moisture-proof, shockproof, flame-retardant
• Meet UL/CE/EMC and safety testing requirements
• Using high-quality enviromentally friendly waterproof thermal conductive
• Can be suing in medical, industrial control, electric power, instrumentation, communication, railway and other fields

Environment Condition

• Working Temerature                  -25—+60 ℃
• Storage temperature                 -40—+80 ℃
• Relative humidity                       5—95 %
• Thermal methods                       Natural cooling
• Atmospheric pressure                80—106 Kpa
• Altitude                                      ≤2000 m
• Vibration coefficient                  10~500Hz,2G10min./1cycle, 60min.each along X,Y,Z axes Meets requirements for secondary road transportation

Input Features( test at room temperature)

• Rated input voltage                          100-240Vac
• Input vlotage range                          85-264VAC/70-350VDC
• The maximum input voltage             270VAC
• The maximum input CURRENT        ≤0.3A
• Input inrush current                         ≤34A
• Input low start                                 ≤50mS
• External fuse recommended           1A/250Vac or 10Ω wire wound resistance, Slow blow

Output Features

• Full-load rated output voltage                         9.0±0.2%
• Load regulation                                                   ±0.5%
• Switching on/off overshoot amplitude                (Rated input voltage, output plus10% load)≤5%Vo
• Output over-current protection Output maximum load             110-130% A
• Ripple/Noise                                                ≤70mVp-p(Typ:50)

Safety Characteristics

• Meet UL/CE requirements
• (UL/CE certification requires customers to self-certify)
• Safe compatible with battery
• The input end design adopts UL certification 0.5A insurance
• The fire ration of PCB board is 94-V0
• Safety standards comply with UL1012,EN60950,UL60950
• Insulation resistance I/P-O/P＞100M 0hms/500Vdc 25℃ 70%RH
• Conforms to radiation EN55011, EN55022(CISPR22)
• Electrostatic discharge IEC/EN 61000-4–2 level 4 8KV/15KV

Temperature rise safety design

Under normal conditons, the maximum temperature rise of the inner surface  of the power supply capacitor, main converter, etc. does not exceed 90℃，and the maximum temperature rise of the shell surface does not exceed 60℃

Dimensional error: 

1. Length, width, height and pin pitch error ± 8%
2. Pin length error ± 1mm
3. Pin diameter error +-0.2mm

Package Includes:

• 1 x Hi-Link HLK-10M09 240AC to 9VDC 10 Watt Switch Power Supply Module