Hey! How are you doing? I hope you and your fam are safe and sound. We here at Techiesms have made numerous types of Home Automation projects. We have experimented with several components, devices and services to get the most out of any automation. We have failed, troubleshooted and corrected plentiful of our mistakes.
Today, I am very excited to present the All-in-one Home Automation Project. With this you will be able to control four AC appliances, along with speed of the fan using the capacitive dimming method. Everything will be working with internet and without internet along with the manual switches and regulators as well. Phew! That sounds so freaking awesome. Well, don’t worry, I have tried to keep it as simple as possible so that it becomes easy for you to learn and make it by your self. Let us just dive in.
- ESP32 (https://amzn.to/2FsFZ3x)
- Hi-Link 5v Power Supply(5W) (https://amzn.to/3mecvYb)
- Terminal Connector (https://amzn.to/2FqUKEe)
- 5v Relay (https://amzn.to/35BTEAa)
- Diode IN4007 (https://amzn.to/2RhazzO)
- Transistor BC547(https://amzn.to/2SK3Fna)
- Resistor 330Ω 1/4W(https://amzn.to/2OQqUuz)
- Resistor 220kΩ 1/4W (https://amzn.to/3kcgna6)
- Resistor 2.2Ω 1/2W (https://amzn.to/32mdSvN)
- Resistor 10kΩ 1/4W (https://amzn.to/2GY6Sxf)
- Slide Switch
- Male Connector
- Capacitor 2.2uF 250v
- Capacitor 3.3uF 250v
This is the circuit diagram in which you need to connect all the components.
You can even buy the whole project assembled from us. By doing so you not only save plenty of time and resources and get the project ready to be used but you’ll also be supporting us.
Working of the Project:-
Most of you must already be familiar with the working of this project. We are using Blynk IoT platform for the internet controlled part and the manual switches and capacitive regulator for the non internet part. Let me provide you a simple to understand flow chart.
For understanding the code in detail, you may watch the video I have linked below. In the video I have explained each and every line and function of the code in detail. For purchasing the project, click here.
This is the schematic in which you need to connect the project to your mains supply.
Be careful while working with mains voltage, do turn of the main switch.
Complete code of the project is uploaded in my GitHub account. You can get it by clicking here!
As I mentioned earlier as well. I have made a complete video showing not only the working and connections in detail but also have explained the code in a well structured manner.
Do check out the video:-