Shop
Showing 121–144 of 252 results
-
Sensors
MQ3 Alcohol Sensor Module
- Power requirements: 5 VDC @ ~165 mA (heater on) / ~60 mA (heater off).
- Current Consumption: 150mA.
- DO output:Â 0.1 and 5V.
- AO output: 0.1- 0.3 V (relative to pollution), the maximum concentration of a voltage of about 4V
- Detecting Concentration: 0.05-10mg/L Alcohol.
SKU: TFF3-001 -
GPS Tracker Projects, Projects For Sale
Multipurpose 4G GPS Tracker Project
This Project is currently in Backorder as we don’t have it in ready stock now. And it will be back in stock at around 30th Nov
- Realtime Location Tracking on our dedicated Android App
- SOS Button to send Location to your loved ones
- Builtin Mic and Speaker for seamless communication
- Supports all SIM card (including JIO)
- Completely Programmable
- Can be powered with 12V vehicle’s battery
SKU: TDF9-004 -
Motors & Motor Drivers, Robotics
N20 Gear Motor 6V 300 Rpm Micro Metal Best Quality
- This is a DC Mini Metal Gear Motor, ideal for making robots
- Lightweight, high torque and low RPM.
- Fine craftsmanship, durable, not easy to wear.
- With excellent stall characteristics, can climb hills easily.
- You can also easily mount a wheel on the motor’s output shaft.
SKU: TBF2-002 -
Electronic Components
NEO-6M GPS Module with EPROM Best Qu
- 5Hz position update rate.
- The cold start time of 38 s and the Hot start time of 1 s.
- Configurable from 4800 Baud to 115200 Baud rates. (default 9600).
- SuperSense ® Indoor GPS: -162 dBm tracking sensitivity.
- Support SBAS (WAAS, EGNOS, MSAS, GAGAN).
- Separated 18 x 18mm GPS antenna.
SKU: TBF1-003 -
Electronic Components
NRF24L01 2.4GHz PA+LNA SMA Wireless Transceiver Module with Antenna
- It uses 2.4GHz global open ISM band, with license free.
- Transmit power is greater than +20 dBm.
- Support six-channel data reception.
- 2Mbit/s speed makes high-quality VoIP possible
- Multi-frequency points: 125 frequency points meet the needs of multi-point communications and frequency hopping.
- Low cost: integrated with high-speed signal processing parts associated with RF protocol, such as: automatically re-send lost packets and generate acknowledge signal;
- SPI interface facilitates the communication with MCU I/O port.
- Facilitate the development for customers, without development RF part.
- Software programming is fully compatible with NRF24L01 modules.
SKU: TDF2-005 -
-
Home Automation Project, Projects For Sale
Offline Voice Recognition based Home Automation Project | 4 Lights + 1 Fan Speed Control
Home Automation Project, Projects For SaleOffline Voice Recognition based Home Automation Project | 4 Lights + 1 Fan Speed Control
- Based on Ai-Thinker VC-02 Module
- No WiFi, No Bluetooth, No Mobile, No Internet Required
- Truly Offline Voice Recognition
- 4 Lights & 1 Fan Speed Control ( Max Rating 5A at 240V AC)
- Can store upto 150 Voice Commands
SKU: TDF1-002 -
-
-
Projects For Sale, Misc Projects
Portable AI Voice Assistant
This Project is currently in Backorder as we don’t have it in ready stock now. And it will be back in stock at around 30th Nov
- Push to Ask any questions
- Tested with Gemini LLM
- External SD card for storing longer questions
- Builtin Speaker & 3.5mm Audio Jack support
- Repeat button for playing previous answer
- Completely Programmable
SKU: TDF9-003 -
IoT & Wireless Boards, Microcontroller Boards
Raspberry Pi Pico W
- RP2040 microcontroller with 2MB of flash memory
- On-board single-band 2.4GHz wireless interfaces (802.11n)
- Micro USB B port for power and data (and for reprogramming the flash)
- 40 pin 21mmx51mm ‘DIP’ style 1mm thick PCB with 0.1″ through-hole pins also with edge castellations
- Exposes 26 multi-function 3.3V general purpose I/O (GPIO)
SKU: TDF1-003 -
Electronic Components, Resistors
Resistor Box (150 Resistors and 30 Values)
- To limit current in a circuit
- To measure current in a circuit
- To generate heat
- To remove electrical energy
- To divide voltage
- To set the gain of an amplifier
- To set a time delayÂ
- To set the frequency of an oscillator
- To protect against surges To absorb unwanted signals
- Electronic electricity meter
- To measure temperatures
SKU: TBF7-001 -
Microcontroller Boards
Seeed Studio XIAO ESP32C6
XIAO ESP32C6 is a cost-effective MCU based on Espressif’s ESP32-C6. This compact MCU excels in Matter-compliant smart home applications with its support for various wireless connectivity (2.4GHz Wi-Fi 6, BLE 5.0, Zigbee, and Thread). Designed with the thumb-size footprint and a single-sided mount of the XIAO Series, it’s perfect for space-limited projects. Encrypted on the chip, the XIAO ESP32C6 ensures a desired level of security streamlined development experience, and swift market entry by integrating easily with major IoT Cloud platforms.
SKU: TFF7-004 -
Electronic Components, IoT & Wireless Boards
Seeed Studio XIAO ESP32S3 – 2.4GHz WiFi, BLE 5.0
- Model: XIAO ESP32S3
- Processor: Xtensa LX7 dual-core, 32-bit processor running up to 240 MHz
- Wireless: Complete 2.4GHz WiFi subsystem, BLE: Bluetooth 5.0, Bluetooth mesh
- On-chip Memory: 8M PSRAM & 8MB Flash
- Working Temperature: -40°C ~ 65°C
SKU: TDF10-002 -
-
Tools, Soldering/Desoldering Equipments
Solder Iron Stand sp-7 Strong & Reliable
- This is a Sonal SP-7 Soldering Iron Stand with a heavy-duty metal base.
- Robust and powerful base to uphold the weight of soldering irons varying from 30w, 35w, 40w, 50w, 60w and 75w.
- The nickel-plated wide spring holder.
- The wide spring holder provides plentiful room for holding the soldering Iron support.
SKU: TDF4-004 -
-
