NodeMCU ESP8266 development Board (CP2102)
SKU: ESP-10029 in stock
NodeMCU ESP8266 is an open-source Lua based firmware and development board specially targeted for IoT based applications. It includes firmware that runs on the ESP8266 Wi-Fi SoC from Espressif Systems and hardware which is based on the ESP-12E module, and like this, it can also be programmed using Arduino IDE and can act as both WiFi Hotspot or can connect to one.
₹254.24 ₹296.61
9 in stock
CompareSpecifications of Nodemcu
- 11 b/g/n Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
- CP2102 Serial / USB Chip
- +19.5dBm output power in 802.11b mode
- 4MB Flash Memory
- Integrated low power 32-bit CPU
- SDIO 1.1 / 2.0, SPI, UART
- Dimensions – 49 x 24.5 x 13mm
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLLs, regulators, DCXO and power management units
- On board USB to serial chip to easily program and upload codes from the Arduino IDE
- Embeds logic level converter circuits
- Has on board 3.3V regulator to ensure enough power to function as your go-to WiFi chip!
- Easy access to the GPIO pins for easy prototyping
- ESP-12E Processor
- Easy to use breadboard friendly form factor
- Voltage Regulator / Converter, excellent DC to DC conversion, super efficient
Pinouts
Documents
You may also like…
Related products
-
Displays, Electronic Components, OLED Display
2.32 cm (0.91 inch) I2C/IIC 128×32 Serial 4-Pin OLED Display Module
Displays, Electronic Components, OLED Display2.32 cm (0.91 inch) I2C/IIC 128×32 Serial 4-Pin OLED Display Module
- Size: 0.91 inch
- Resolution: 128 x 32
- Controlling Chip: SSD1306
- Display Area: 22.384 x 5.584mm
- Driving Voltage: 3-5V
- Operating Temperature: -40~70 celsius
- Interface Type: IIC
- Light Color: White
SKU: OLED-8003 -
Electronic Components, IoT & Wireless Boards
SIM800L GPRS GSM Module – Quad-Band TTL Serial Port Good Quality
Electronic Components, IoT & Wireless BoardsSIM800L GPRS GSM Module – Quad-Band TTL Serial Port Good Quality
SIM800L is a miniature cellular module which allows for GPRS transmission, sending and receiving SMS and making and receiving voice calls. Low cost and small footprint and quad band frequency support make this module perfect solution for any project that require long range connectivity. After connecting power module boots up, searches for cellular network and login automatically. On board LED displays connection state (no network coverage – fast blinking, logged in – slow blinking)
SKU: MISC-11003 -
Electronic Components, Miscellaneous components
Male to Male Jumper Wires (20cm) – 40 Pieces pack
- 40P color DuPont line
- Length: 200mm
- Weight: 30 gm
- Compatible with 2.54mm spacing pin headers
- 40pcs chromatic male to male color jump wire
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
SKU: PRO-3006 -
Electronic Components, IoT & Wireless Boards
Ai Thinker A9G GSM/GPRS+GPS/BDS Development Board Original Quality
Electronic Components, IoT & Wireless BoardsAi Thinker A9G GSM/GPRS+GPS/BDS Development Board Original Quality
A9G GSM/GPRS+GPS Modules is a quad-band GSM/GPRS module based on RDA8955 SoC and comes with 29 GPIOs and an integrated SDK. These modules support the basic phone voice call/SMS, serial to GPRS, and GPS data transmission functions which can be used in a wide range of applications. The A9G modules allow users to make a voice call, use SMS services, and access the internet and base position with only a 2G SIM card. These modules operate at -20°C to 70°C temperature range. Applications include IoT, vehicle-mounted equipment, remote localization, and electric power environment monitoring.
SKU: MISC-11004
