MP3-TF-16P MP3 Disk TF Card Module
₹88.98 ₹169.49
-
Electronic Components, Miscellaneous components
MP3-TF-16P MP3 Disk TF Card Module
It’s a small and low-cost MP3 module player with a simplified output directly to the speaker. It can be used as a stand-alone module with an attached battery, speaker, and push buttons or used in combination with an Arduino UNO or any other with RX/TX capabilities.This perfectly integrates the hard decoding module, which supports common audio formats such as MP3, WAV, and WMA. Besides, this module also supports TF card with FAT16, FAT32 file system. Through a simple serial port, you can play the designated music without any other tedious underlying operations.SKU: TBF5-003 -
Electronic Components, Miscellaneous components
PAM8403 5V Two-channel Stereo Mini Class-D 3W+3W Audio Amplifier Original Quality
Electronic Components, Miscellaneous componentsPAM8403 5V Two-channel Stereo Mini Class-D 3W+3W Audio Amplifier Original Quality
The PAM8403 is a 3W, class-D audio amplifier. It offers low THD+N, allowing it to achieve high-quality sound reproduction. The new filterless architecture allows the device to drive the speaker directly, requiring no low-pass output filters, thus saving system cost and PCB area.
With the same numbers of external components, the efficiency of the PAM8403 is much better than that of Class-AB cousins. It can extend the battery life, which makes it well-suited for portable applications.
SKU: TAF6-005
MP3-TF-16P MP3 Disk TF Card Module
Pin Diagram
SPECIFICATION
- Supported sampling rates (kHz): 8/11.025/12/16/22.05/24/32/44.1/48
- 24 -bit DAC output, support for dynamic range 90dB, SNR support 85dB
- Fully supports FAT16, FAT32 file system, maximum support 32G of the TF card, support 32G of U disk, 64M bytes NOR FLASH
- A variety of control modes, I/O control mode, serial mode, AD button control mode
- Advertising sound waiting function, the music can be suspended. when advertising is over in the music continue to play
- Audio data sorted by folder supports up to 100 folders, every folder can hold up to 255 songs
- 30 level adjustable volume, 6 -level EQ adjustable
APPLICATIONS
- Car navigation voice broadcast;
- Road transport inspectors, toll stations voice prompts;
- Railway station, bus safety inspection voice prompts;
- Electricity, communications, financial business hall voice prompts;
- Vehicle into and out of the channel verify that the voice prompts;
- The public security border control channel voice prompts;
- Multi-channel voice alarm or equipment operating guide voice;
- The electric tourist car safe driving voice notices;
- Electromechanical equipment failure alarm;
- Fire alarm voice prompts;
- The automatic broadcast equipment, regular broadcast.
Getting Started Video
DOCUMENTS
Know Issues & their solutions
Problem – Not Working with ESP32 Board
Solution –
Hi all
I found what is issue with ESP32 and DF Player. When working with ESP32 WiFi/Bluetooth MCU under Arduino SDK for ESP32, you will notice that Serial work just fine. But Serial1 and Serial2 do not. ESP32 has 3 hardware UARTs that can be mapped to almost any pin. But, Serial1 and Serial2 will not work. In case of ESP32 this just has to be done in a slightly different way:
Source: https://quadmeup.com/arduino-esp32-and-3-hardware-serial-ports/
When DFPlayer use HW serial you have to replace
Serial1.begin(9600);
by
MySerial.begin(9600, SERIAL_8N1, 16, 17); (with definition “HardwareSerial MySerial(1);” )
| Weight | 0.004 kg |
|---|---|
| HSN Code | 85011019 |
Based on 0 reviews
Be the first to review “MP3-TF-16P MP3 Disk TF Card Module”
You must be logged in to post a review.
You may also like…
-
Payment Sound Box Project, Projects For Sale
techiesms Sound Box (Without 3d Printed Case)
This project is used to get audio feedback about the payment received on your Paytm Business account via PayTM QR code. It work’s on GSM connectivity and reads the SMS received from PayTM and fetches out the amount received and than it speak out. Here you can change the Voice notes according to your choice and need. It’s totally customisable.
SKU: TCF2-001-1
Related products
-
Electronic Components, Sensors
DHT11 Temperature and Humidity Sensor Module
DHT11 is a low-cost digital sensor for sensing temperature and humidity. This sensor can be easily interfaced with any micro-controller such as Arduino, Raspberry Pi etc to measure humidity and temperature instantaneously.
SKU: TAF6-001 -
Electronic Components, Motors & Motor Drivers
L293D Motor Driver Shield for Arduino
- 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
- 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, and internal kickback protection diodes.
- Can run motors on 4.5VDC to 25VDC.
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, or interleaved stepping.
SKU: TDF6-002 -
Electronic Components, Miscellaneous components
Female to Female Jumper Wires (20cm) – 40 Pieces pack
Electronic Components, Miscellaneous componentsFemale to Female Jumper Wires (20cm) – 40 Pieces pack
- 40P color DuPont line
- Length: 200mm
- Weight: 30 gm
- Compatible with 2.54mm spacing pin headers
- 40pcs chromatic female to female color jump wire
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
SKU: TAF1-005 -
Electronic Components, Sensors
DS18B20 Water Proof Temperature Sensor Probe Good Quality
- A probe by new original installation import DS18B20 temperature sensor chip.
- Chip each pin use heat shrinkable tube to prevent short circuit, internal sealing glue, waterproof, moistureproof.
- Stainless steel tube encapsulation waterproof moistureproof prevent rust.
- Stainless steel shell (6 * 45 mm), lead length 100 cm (shielding wire) use stability.
- Without the external components, the unique single bus;
SKU: TBF1-007
There are no reviews yet.