Shop
Showing 169–192 of 289 results
-
Electronic Components, Resistors
Resistor Box (150 Resistors and 30 Values)
- To limit current in a circuit
- To measure current in a circuit
- To generate heat
- To remove electrical energy
- To divide voltage
- To set the gain of an amplifier
- To set a time delayÂ
- To set the frequency of an oscillator
- To protect against surges To absorb unwanted signals
- Electronic electricity meter
- To measure temperatures
SKU: TBF7-001 -
Microcontroller Boards
Seeed Studio XIAO ESP32C6
XIAO ESP32C6 is a cost-effective MCU based on Espressif’s ESP32-C6. This compact MCU excels in Matter-compliant smart home applications with its support for various wireless connectivity (2.4GHz Wi-Fi 6, BLE 5.0, Zigbee, and Thread). Designed with the thumb-size footprint and a single-sided mount of the XIAO Series, it’s perfect for space-limited projects. Encrypted on the chip, the XIAO ESP32C6 ensures a desired level of security streamlined development experience, and swift market entry by integrating easily with major IoT Cloud platforms.
SKU: TFF7-004 -
Electronic Components, IoT & Wireless Boards
Seeed Studio XIAO ESP32S3 – 2.4GHz WiFi, BLE 5.0
- Model: XIAO ESP32S3
- Processor: Xtensa LX7 dual-core, 32-bit processor running up to 240 MHz
- Wireless: Complete 2.4GHz WiFi subsystem, BLE: Bluetooth 5.0, Bluetooth mesh
- On-chip Memory: 8M PSRAM & 8MB Flash
- Working Temperature: -40°C ~ 65°C
SKU: TDF10-002 -
-
Tools, Soldering/Desoldering Equipments
Solder Iron Stand sp-7 Strong & Reliable
- This is a Sonal SP-7 Soldering Iron Stand with a heavy-duty metal base.
- Robust and powerful base to uphold the weight of soldering irons varying from 30w, 35w, 40w, 50w, 60w and 75w.
- The nickel-plated wide spring holder.
- The wide spring holder provides plentiful room for holding the soldering Iron support.
SKU: TDF4-004 -
-
-
Sensors
Speed Measuring Sensor Module For Arduino
- Using imported groove optical coupling sensor, width 5mm.
- It has the output state light, if output high level, the lights are off. if output low level, it on.
- If it covered, it will output high level; otherwise, its output low level.
- Good signal and waveform, with a strong driving ability for more than 15mA.
- Equipped with a fixed bolt hole, easy install.
- Use the LM393 wide voltage comparer.
SKU: TBF9-004-1 -
Motors & Motor Drivers
Submersible Mini DC Water Pump 3-6V DC
Operating Voltage : 3 ~ 6V
Operating Current : 130 ~ 220mA
Flow Rate : 80 ~ 120 L/H
Maximum Lift : 40 ~ 110 mm
Continuous Working Life : 500 hours
Driving Mode : DC, Magnetic Driving
Material : Engineering Plastic
Outlet Outside Diameter : 7.5 mm
Outlet Inside Diameter : 5 mmSKU: TFF5-002 -
Sensors
TCS3200 Color Recognition Sensor Module
- Operating Voltage: 3V-5V
- High-resolution conversion of light intensity to frequency.
- Chip pins all has drawn for standard 100.
- Put the needle (2.54 mm).
- Mil-convenient for bitmap board.
- Programmable color and full-scale output frequency.
- Communicate directly with a microcontroller.
- Low-profile surface mount package.
SKU: TFF7-001 -
-
LCD Display, Displays
TM1637 4 Bits Digital Tube LED Display Module
- Ease to use.
- Ease of multiplexing.
- Can use as a 4 digit display unit.
- Can use as a clock display.
- DIY clock project.
- 4 digit display unit.
- Electrical/Electronic projects.
- The counter project using 7 segment display.
- 4 M2 screws positioning holes for easy installation
SKU: TFF7-001-1 -
Servo Motor
Tower Pro MG996R Digital Metal Gear High Torque Servo Motor (360 Degree Rotation)
- Gear Type: Metal gear
- Operating voltage: 4.8 V – 7.2 V
- Running Current 500 mA – 900 mA (6V)
- Stall Current 2.5 A (6V)
- Temperature range: 0 ºC – 55 ºC
- Control System: Analog
- Operating Angle: 360degree
SKU: TFF1-003 -
Battery
TP4056 1A Li-Ion Lithium Battery Charging Module without protection – Micro B USB
- Led indicator: red is charging Green is fully charged.
- Current Protection: Yes
- Inversed polarity: NO.
- Use mature charging chip TP4056 for simple peripheral circuits, good protection performance, and high charging accuracy.
- Fully machinery automated processing, all patch parts manufacturing.
SKU: TDF9-002 -
Sensors
TSOP1738 – Infrared Sensor
- Photo detector and preamplifier in one package
- Internal filter for PCM frequency
- Improved shielding against electrical field disturbance
- TTL and CMOS compatibility
- Output active low
- Low power consumption
- High immunity against ambient light
- Continuous data transmission possible (up to 2400 bps)
- Suitable burst length ≥10 cycles/burst
SKU: TFF4-004