Shop
Showing 145–168 of 289 results
-
Uncategorized
Laser Diode Module 650nm 6mm 5V DC 5mW Mini
- Output Power: 5mW
- Working Voltage: 5V DC
- Working temperature: -10 ℃~＋40 ℃
- Housing material: Copper
- Working life: more than 2000 hours
- Spot mode: Dot Facula (continuous output)
- Laser wavelength: 650nm red-colored.
- Operating current: <40mA
- Power lead length: 120mm.
SKU: TBF4-004-1 -
Electronic Components, Power Supply
LM2596 HV DC-DC Buck Converter 4.5-40V to 3-35V Adjustable Step Down Module
Electronic Components, Power SupplyLM2596 HV DC-DC Buck Converter 4.5-40V to 3-35V Adjustable Step Down Module
- Input voltage: 4.5-40V,
- Output voltage: (3-35V) continuously adjustable (recommended load debugging).
- Minimum pressure: 1.5V
- Output current: rated current 2A, 3A maximum
- Output Power: 15W maximum
SKU: TBF5-002 -
Sensors, Electronic Components
LM393 Photosensitive Light-Dependent Control Sensor LDR Module
- LDR module 4 PIN
- Operating voltage 3.3V-5V
- Signal output indicator light.
- LDR module 4 PIN
- Able to detect ambient brightness and light intensity Adjustable sensitivity (via blue digital potentiometer adjustment)
SKU: TBF3-004 -
-
Displays, LED Matrix Display
MAX7219 LED Dot Matrix 4 In 1 Display with 5P Line Module
- Requires only 3 communication wires of MCU
- Pre-cascaded MAX7219 Dot Matrix LED Module.
- The overall size of the display is very compact
- The PCB features M3 holes for mounting.
- Module with input and output interfaces
- Support for cascading multiple modules
- Quite large display
SKU: TDF7-002 -
-
Sensors
MPU6050 3-Axis Accelerometer and Gyro Sensor
- Chip built-in 16bit AD converter, 16-bit data output.
- I2C Digital-output of 6 or 9-axis MotionFusion data in rotation matrix, quaternion, Euler Angle, or raw data format.
- Selectable Solder Jumpers on CLK, FSYNC, and AD0.
- Digital Motion Processingâ„¢ (DMPâ„¢) engine offloads complex MotionFusion, sensor timing synchronization, and gesture detection.
- Embedded algorithms for run-time bias and compass calibration. No user intervention is required.
- Digital-output temperature sensor.
SKU: TAF6-006-1 -
Sensors, Electronic Components
MQ 135 Air Quality/Gas Detector Sensor Module For Arduino
- Sensitivity to Ammonia, Sulphide, and Benzene steam
- Sensitive for benzene, alcohol, smoke
- Fast response and recovery
- Adjustable sensitivity
- Signal output indicator
- Output voltage boosts along with the concentration of the measured gases increases.
SKU: TBF3-006 -
Sensors
MQ-7 CO Carbon Monoxide Coal Gas Sensor Module
- The analog output voltage, the higher the concentration the higher the voltage.
- The carbon monoxide detection with better sensitivity.
- There are four screw holes for easy positioning.
- With a long service life and reliable stability.
- Rapid response and recovery characteristics.
SKU: TFF3-003 -
Sensors
MQ3 Alcohol Sensor Module
- Power requirements: 5 VDC @ ~165 mA (heater on) / ~60 mA (heater off).
- Current Consumption: 150mA.
- DO output:Â 0.1 and 5V.
- AO output: 0.1- 0.3 V (relative to pollution), the maximum concentration of a voltage of about 4V
- Detecting Concentration: 0.05-10mg/L Alcohol.
SKU: TFF3-001 -
GPS Tracker Projects, Projects For Sale
Multipurpose 4G GPS Tracker Project
This Project is currently in Backorder as we don’t have it in ready stock now. And it will be back in stock at around 30th Dec
- Realtime Location Tracking on our dedicated Android App
- SOS Button to send Location to your loved ones
- Builtin Mic and Speaker for seamless communication
- Supports all SIM card (including JIO)
- Completely Programmable
- Can be powered with 12V vehicle’s battery
SKU: TDF9-004 -
Motors & Motor Drivers, Robotics
N20 Gear Motor 6V 300 Rpm Micro Metal Best Quality
- This is a DC Mini Metal Gear Motor, ideal for making robots
- Lightweight, high torque and low RPM.
- Fine craftsmanship, durable, not easy to wear.
- With excellent stall characteristics, can climb hills easily.
- You can also easily mount a wheel on the motor’s output shaft.
SKU: TBF2-002 -
Electronic Components
NEO-6M GPS Module with EPROM Best Qu
- 5Hz position update rate.
- The cold start time of 38 s and the Hot start time of 1 s.
- Configurable from 4800 Baud to 115200 Baud rates. (default 9600).
- SuperSense ® Indoor GPS: -162 dBm tracking sensitivity.
- Support SBAS (WAAS, EGNOS, MSAS, GAGAN).
- Separated 18 x 18mm GPS antenna.
SKU: TBF1-003 -
RFID/NFC
NFC Sticker 13.56MHz ISO14443A RFID Tag
The NFC Sticker 13.56MHz ISO14443A RFID Tag is a compact, contactless solution for seamless data sharing and smart interactions. Compatible with most NFC-enabled smartphones, it’s perfect for mobile payments, access control, marketing, and more. Durable and customizable, this sticker is designed for convenience and innovation—just tap to connect!
SKU: TBF2-002-1 -
Electronic Components
NRF24L01 2.4GHz PA+LNA SMA Wireless Transceiver Module with Antenna
- It uses 2.4GHz global open ISM band, with license free.
- Transmit power is greater than +20 dBm.
- Support six-channel data reception.
- 2Mbit/s speed makes high-quality VoIP possible
- Multi-frequency points: 125 frequency points meet the needs of multi-point communications and frequency hopping.
- Low cost: integrated with high-speed signal processing parts associated with RF protocol, such as: automatically re-send lost packets and generate acknowledge signal;
- SPI interface facilitates the communication with MCU I/O port.
- Facilitate the development for customers, without development RF part.
- Software programming is fully compatible with NRF24L01 modules.
SKU: TDF2-005 -
-
Home Automation Project, Projects For Sale
Offline Voice Recognition based Home Automation Project | 4 Lights + 1 Fan Speed Control
Home Automation Project, Projects For SaleOffline Voice Recognition based Home Automation Project | 4 Lights + 1 Fan Speed Control
- Based on Ai-Thinker VC-02 Module
- No WiFi, No Bluetooth, No Mobile, No Internet Required
- Truly Offline Voice Recognition
- 4 Lights & 1 Fan Speed Control ( Max Rating 5A at 240V AC)
- Can store upto 150 Voice Commands
SKU: TDF1-002 -
-
-
-
IoT & Wireless Boards, Microcontroller Boards
Raspberry Pi Pico W
- RP2040 microcontroller with 2MB of flash memory
- On-board single-band 2.4GHz wireless interfaces (802.11n)
- Micro USB B port for power and data (and for reprogramming the flash)
- 40 pin 21mmx51mm ‘DIP’ style 1mm thick PCB with 0.1″ through-hole pins also with edge castellations
- Exposes 26 multi-function 3.3V general purpose I/O (GPIO)
SKU: TDF1-003
