Shop
Showing 73–96 of 188 results
-
Electronic Components
NEO-6M GPS Module with EPROM Best Qu
- 5Hz position update rate.
- The cold start time of 38 s and the Hot start time of 1 s.
- Configurable from 4800 Baud to 115200 Baud rates. (default 9600).
- SuperSense ® Indoor GPS: -162 dBm tracking sensitivity.
- Support SBAS (WAAS, EGNOS, MSAS, GAGAN).
- Separated 18 x 18mm GPS antenna.
SKU: TBF1-003 -
Electronic Components
NRF24L01 2.4GHz PA+LNA SMA Wireless Transceiver Module with Antenna
- It uses 2.4GHz global open ISM band, with license free.
- Transmit power is greater than +20 dBm.
- Support six-channel data reception.
- 2Mbit/s speed makes high-quality VoIP possible
- Multi-frequency points: 125 frequency points meet the needs of multi-point communications and frequency hopping.
- Low cost: integrated with high-speed signal processing parts associated with RF protocol, such as: automatically re-send lost packets and generate acknowledge signal;
- SPI interface facilitates the communication with MCU I/O port.
- Facilitate the development for customers, without development RF part.
- Software programming is fully compatible with NRF24L01 modules.
SKU: TDF2-005 -
-
IoT & Wireless Boards, Microcontroller Boards
Raspberry Pi Pico W
- RP2040 microcontroller with 2MB of flash memory
- On-board single-band 2.4GHz wireless interfaces (802.11n)
- Micro USB B port for power and data (and for reprogramming the flash)
- 40 pin 21mmx51mm ‘DIP’ style 1mm thick PCB with 0.1″ through-hole pins also with edge castellations
- Exposes 26 multi-function 3.3V general purpose I/O (GPIO)
SKU: TDF1-003 -
Electronic Components, Resistors
Resistor Box (150 Resistors and 30 Values)
- To limit current in a circuit
- To measure current in a circuit
- To generate heat
- To remove electrical energy
- To divide voltage
- To set the gain of an amplifier
- To set a time delay
- To set the frequency of an oscillator
- To protect against surges To absorb unwanted signals
- Electronic electricity meter
- To measure temperatures
SKU: TBF7-001 -
Microcontroller Boards
Seeed Studio XIAO ESP32C6
XIAO ESP32C6 is a cost-effective MCU based on Espressif’s ESP32-C6. This compact MCU excels in Matter-compliant smart home applications with its support for various wireless connectivity (2.4GHz Wi-Fi 6, BLE 5.0, Zigbee, and Thread). Designed with the thumb-size footprint and a single-sided mount of the XIAO Series, it’s perfect for space-limited projects. Encrypted on the chip, the XIAO ESP32C6 ensures a desired level of security streamlined development experience, and swift market entry by integrating easily with major IoT Cloud platforms.
SKU: TFF7-004 -
-
Tools, Soldering/Desoldering Equipments
Solder Iron Stand sp-7 Strong & Reliable
- This is a Sonal SP-7 Soldering Iron Stand with a heavy-duty metal base.
- Robust and powerful base to uphold the weight of soldering irons varying from 30w, 35w, 40w, 50w, 60w and 75w.
- The nickel-plated wide spring holder.
- The wide spring holder provides plentiful room for holding the soldering Iron support.
SKU: TDF4-004 -
-
Motors & Motor Drivers
Submersible Mini DC Water Pump 3-6V DC
Operating Voltage : 3 ~ 6V
Operating Current : 130 ~ 220mA
Flow Rate : 80 ~ 120 L/H
Maximum Lift : 40 ~ 110 mm
Continuous Working Life : 500 hours
Driving Mode : DC, Magnetic Driving
Material : Engineering Plastic
Outlet Outside Diameter : 7.5 mm
Outlet Inside Diameter : 5 mmSKU: TFF5-002 -
Sensors
TCS3200 Color Recognition Sensor Module
- Operating Voltage: 3V-5V
- High-resolution conversion of light intensity to frequency.
- Chip pins all has drawn for standard 100.
- Put the needle (2.54 mm).
- Mil-convenient for bitmap board.
- Programmable color and full-scale output frequency.
- Communicate directly with a microcontroller.
- Low-profile surface mount package.
SKU: TFF7-001 -
LCD Display, Displays
TM1637 4 Bits Digital Tube LED Display Module
- Ease to use.
- Ease of multiplexing.
- Can use as a 4 digit display unit.
- Can use as a clock display.
- DIY clock project.
- 4 digit display unit.
- Electrical/Electronic projects.
- The counter project using 7 segment display.
- 4 M2 screws positioning holes for easy installation
SKU: TFF7-001-1 -
Servo Motor
Tower Pro MG996R Digital Metal Gear High Torque Servo Motor (360 Degree Rotation)
- Gear Type: Metal gear
- Operating voltage: 4.8 V – 7.2 V
- Running Current 500 mA – 900 mA (6V)
- Stall Current 2.5 A (6V)
- Temperature range: 0 ºC – 55 ºC
- Control System: Analog
- Operating Angle: 360degree
SKU: TFF1-003 -
Sensors
TSOP1738 – Infrared Sensor
- Photo detector and preamplifier in one package
- Internal filter for PCM frequency
- Improved shielding against electrical field disturbance
- TTL and CMOS compatibility
- Output active low
- Low power consumption
- High immunity against ambient light
- Continuous data transmission possible (up to 2400 bps)
- Suitable burst length ≥10 cycles/burst
SKU: TFF4-004 -
USB to TTL Programmers
Universal TTL-Programmer Version-2 With TYPE-C Socket
This single programmer will help you to program multiple microcontroller chips/boards. This board got dedicated slots for programming
- ESP32 Cam Board
- Arduino Pro mini Board
- ESP-01 Board
- ESP32 Module (Extension PCB Required)
- ESP8266 12 Module (Extension PCB Required)
Along with that, it also got a dedicated pinout of a regular TTL programmer using which you can program almost all the microcontroller chips. This simplifies the programming of the Microcontroller significantly since no manual reset and boot mode selection is needed when using with a common USB to a serial interface. It’s a must-have tool for all IOT and Electronics Engineers.
SKU: TCF3-004 -
Electronic Components, Sensors
Vibration Sensor Module SW-420
- Using SW-420 normally closed type vibration sensor
- Comparator output, clean signal, good waveform, strong driving ability, >15mA
- Operating voltage 3.3V ~ 5V
- Output format: digital switching output (0 and 1)
- Using a wide voltage LM393 comparator
- With bolt holes for easy installation
SKU: TFF2-003 -
Tools, Soldering/Desoldering Equipments
Wire Cutter 07
- H-1 cm L-12cm W-50 gm.
- A versatile Wire Cutter tool for cutting copper and aluminum conductors from 0.8mm to 1.2mm.
- Made out of high-grade alloy steel with black oxide finish heat treated to 60 HRC on cutting edges.
- Suitable for dressing components on printed circuit boards.
- Handles made out of high-grade ABS plastics.
SKU: TAF2-001