EP24 Thermal Printer With Case 5V-9V compatible with ESP32/Arduino
Out of stock
- Low-noise direct thermal printing method
- Fast printing speed, low noise
- Can support Max.40MM (diameter) paper roll, around 16-20 meter. Optional serial interface (RS-232C, TTL) / USB port
- Rich of graphics / curves / characters print function
- Easy paper loading structure
- Support 5V-9V wide power voltage
₹1,524.58 ₹1,694.92
Out of stock
Compare-
Electronic Components
EP24 Thermal Printer With Case 5V-9V compatible with ESP32/Arduino
- Low-noise direct thermal printing method
- Fast printing speed, low noise
- Can support Max.40MM (diameter) paper roll, around 16-20 meter. Optional serial interface (RS-232C, TTL) / USB port
- Rich of graphics / curves / characters print function
- Easy paper loading structure
- Support 5V-9V wide power voltage
SKU: TDF7-005
Specifications of Thermal Printer
|
ITEM |
SPECIFICATION |
|
Print method |
thermal direct line printing |
|
Paper loading method |
easy paper loading |
|
Paper width |
57mm |
|
Print width |
48mm |
|
Resolution ration |
8dots/mm(384dots/line) |
|
Life of printing head |
50km |
|
Printing speed |
50mm/sec.; Max.:80MM/sec.(voltage 8.5V) |
|
Character size |
ANK: 9×17,12×24; GBK: 24×24 |
|
Chinese character fonts |
GB18030: 12×24 or 24x24dots |
|
Outline dimension |
76.8 W x 77.4 D x 47.6H mm |
|
Installation: |
72.8W x 73.4D |
|
Embedded depth |
34.65MM |
|
Paper roll specification |
(width:58mm,Max. diameter:40mm) |
|
Interface |
Serial(RS232C,TTL)/ USB |
|
Input power |
DC5-9V |
|
Operating temperature |
0°C~55°C |
|
Storage temperature |
-25°C~70°C |
|
Operating humidity |
10°C~80°C |
|
Storage humidity |
10°C~90°C |
Datasheet of this Thermal Printer
| Weight | 0.116 kg |
|---|---|
| HSN Code | 84439959 |
Based on 0 reviews
Be the first to review “EP24 Thermal Printer With Case 5V-9V compatible with ESP32/Arduino”
You must be logged in to post a review.
Related products
-
Electronic Components, Sensors
DHT11 Temperature and Humidity Sensor Module
DHT11 is a low-cost digital sensor for sensing temperature and humidity. This sensor can be easily interfaced with any micro-controller such as Arduino, Raspberry Pi etc to measure humidity and temperature instantaneously.
SKU: TAF6-001 -
Electronic Components, Miscellaneous components
PAM8403 5V Two-channel Stereo Mini Class-D 3W+3W Audio Amplifier Original Quality
Electronic Components, Miscellaneous componentsPAM8403 5V Two-channel Stereo Mini Class-D 3W+3W Audio Amplifier Original Quality
The PAM8403 is a 3W, class-D audio amplifier. It offers low THD+N, allowing it to achieve high-quality sound reproduction. The new filterless architecture allows the device to drive the speaker directly, requiring no low-pass output filters, thus saving system cost and PCB area.
With the same numbers of external components, the efficiency of the PAM8403 is much better than that of Class-AB cousins. It can extend the battery life, which makes it well-suited for portable applications.
SKU: TAF6-005 -
Electronic Components, IoT & Wireless Boards
Ai Thinker A9G GSM/GPRS+GPS/BDS Development Board Original Quality
Electronic Components, IoT & Wireless BoardsAi Thinker A9G GSM/GPRS+GPS/BDS Development Board Original Quality
A9G GSM/GPRS+GPS Modules is a quad-band GSM/GPRS module based on RDA8955 SoC and comes with 29 GPIOs and an integrated SDK. These modules support the basic phone voice call/SMS, serial to GPRS, and GPS data transmission functions which can be used in a wide range of applications. The A9G modules allow users to make a voice call, use SMS services, and access the internet and base position with only a 2G SIM card. These modules operate at -20°C to 70°C temperature range. Applications include IoT, vehicle-mounted equipment, remote localization, and electric power environment monitoring.
SKU: TAF7-004 -
Electronic Components, Miscellaneous components
Female to Female Jumper Wires (20cm) – 40 Pieces pack
Electronic Components, Miscellaneous componentsFemale to Female Jumper Wires (20cm) – 40 Pieces pack
- 40P color DuPont line
- Length: 200mm
- Weight: 30 gm
- Compatible with 2.54mm spacing pin headers
- 40pcs chromatic female to female color jump wire
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
SKU: TAF1-005
There are no reviews yet.