4G Development Board with GNSS/GPS & BLE
- Input Supply: 5V-12V DC
- DATA Transfer LTE(Mbps): 10 Downlink / 5 Uplink
- SIM Holder: Micro SIM
- SIMCOM A7672S 4G LTE chip on-board
- Builtin GNSS Support
- Builtin BLE Support
- Builtin Microphone
- Supports 4G + 2G (JIO SIM supported)
- Works with Arduino, ESP8266, ESP32
₹2,999.00 (Exc. GST)
Compare-
IoT & Wireless Boards
4G Development Board with GNSS/GPS & BLE
- Input Supply: 5V-12V DC
- DATA Transfer LTE(Mbps): 10 Downlink / 5 Uplink
- SIM Holder: Micro SIM
- SIMCOM A7672S 4G LTE chip on-board
- Builtin GNSS Support
- Builtin BLE Support
- Builtin Microphone
- Supports 4G + 2G (JIO SIM supported)
- Works with Arduino, ESP8266, ESP32
SKU: TBF8-001 -
Electronic Components
9v Battery Snap Connector + DC Jack(Battery Connector Cap)
- Excellent Material.
- Fine workmanship.
- It is an environmental 9V battery buckle.
- T- fonts, with red and black connecting lines.
- Save power and protect the environment.
- Good electrical conductivity and comfortable sense of touch.
SKU: TFF5-004-1
About 4G Development board by techiesms
Since a long time our makers community is using SIM800L Module for making this Cellular Network based IOT projects but as we all know that SIM800 only supports 2G connectivity and many countries already stopped serving 2G bands in their regions. Soon we can also expect complete ban on 2G Bands in India as well.
So we at techiesms already developed our very own 4G development board that will not only help you to make all those projects that you made with SIM800L module, but also supports a lot of new features and specifications in it which will open tremendous possibilities of making IOT project based on 4G connectivity.
4G Development board Overview
Pinouts
|
Pin Number |
Pin Name |
Description |
|
1 |
GND |
Module ground reference |
|
2 |
5V Out |
5V Output Only Pin for Powering External Microcontroller |
|
3 |
3.3V Out |
3.3V Output Only Pin for Powering External Microcontroller |
|
4,5 |
SPK_N, SPK_P |
Speaker differential output |
|
6 |
RI |
Ring Indicator Interrupt |
|
7 |
DTR |
Serial Data Terminal Ready pin |
|
8 |
RST |
Reset pin, pull low for 100ms to perform hard reset |
|
9 |
PWRKEY |
Power On/Off pin. Pull High for 50ms to Power On. Pull High for 2500ms to Power off |
|
10 |
TX |
Serial Data Output |
|
11 |
RX |
Serial Data Input
|
|
12 |
GND |
Module ground reference |
Package Includes
- A7672S 4G development board
- LTE Antenna
- GPS/GNSS Antenna
- BLE Antenna
Pinouts
| Weight | 0.065 kg |
|---|---|
| HSN Code | 85176990 |
Based on 0 reviews
Be the first to review “4G Development Board with GNSS/GPS & BLE”
You must be logged in to post a review.
Related products
-
Electronic Components, IoT & Wireless Boards
ESP32 Cam Board
- The smallest 802.11b/g/n Wi-Fi BT SoC module.
- Low power 32-bit CPU, can also serve the application processor.
- Up to 160MHz clock speed, summary computing power up to 600 DMIPS.
- Built-in 520 KB SRAM, external 4MPSRAM.
- Supports UART/SPI/I2C/PWM/ADC/DAC.
- Support OV2640 and OV7670 cameras, built-in flash lamp.
- Support image WiFI upload.
- Supports TF card.
- Supports multiple sleep modes.
- Embedded Lwip and FreeRTOS.
- Supports STA/AP/STA+AP operation mode.
- Support Smart Config/AirKiss technology.
- Support for serial port local and remote firmware upgrades (FOTA).
SKU: TAF4-006 -
IoT & Wireless Boards, Electronic Components
ESP-12E: ESP8266 Serial Port WIFI Wireless Transceiver Module
IoT & Wireless Boards, Electronic ComponentsESP-12E: ESP8266 Serial Port WIFI Wireless Transceiver Module
- 802.11 b/g/n
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLL, regulators, DCXO and power management units
SKU: TAF7-005-1 -
Electronic Components, IoT & Wireless Boards, Microcontroller Boards
TTGO T-Call V1.4 ESP32 Wireless Module SIM Antenna SIM Card SIM800L Module Unsoldered
Electronic Components, IoT & Wireless Boards, Microcontroller BoardsTTGO T-Call V1.4 ESP32 Wireless Module SIM Antenna SIM Card SIM800L Module Unsoldered
- Chipset :ESPRESSIF-ESP32 240MHz Xtensa® single-/dual-core 32-bit LX6 microprocessor
- FLASH: QSPI flash 4MB / PSRAM 8MB
- SRAM:520 kB SRAM
- Button: Reset
- USB to TTL: CP2104
- Modular interface: UART,SPI,SDIO,I2C,PWM,TV PWM,I2S,IRGPIO
- On-board clock:40MHz crystal oscillator
- Working voltage:2.7V-3.6V
- Working current: About 70mA
SKU: ESP-1007
There are no reviews yet.