CJMCU-9548 TCA9548A I2C Multiplexer | 8 Channel Multiple Extensions Development Board
9 in stock
Features :
- 1-to-8 Bidirectional Translating Switches.
- Supports Hot Insertion.
- Low Standby Current.
- 1-to-8 Bidirectional Translating Switches.
- Active-Low Reset Input.
- Power Up With All Switch Channels Deselected.
- I2C Bus and SMBus Compatible.
- 5-V Tolerant Inputs.
- Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II.
₹93.22 ₹118.64
9 in stock
CompareAbout TCA9548A I2C Multiplexer Module
You just found the perfect I2C sensor, and you want to wire up two, three, or more of them to your Arduino. When you realize “Oh no, this chip has a fixed I2C address, and from what I know about I2C; you cannot have two devices with the same address on the same SDA/SCL pins”. Are you out of luck? You would be if you don’t have this cool CJMCU-9548 TCA9548A I2C 8 Channel Multiple extensions development board.
The CJMCU TCA9548A I2C Multiplexer development board is interesting in that it has an I2C address (0x70 by default) – and you basically send it a command to tell it which I2C multiplexed output you want to talk to, then you can address the board you want to address.
Package Includes :
- 1 x CJMCU TCA9548A I2C 8 Channel Multiple extensions development board.
- 2 x Header set ( Without Soldered).
| Weight | 0.004 kg |
|---|---|
| HSN Code | 85429000 |
Based on 0 reviews
Be the first to review “CJMCU-9548 TCA9548A I2C Multiplexer | 8 Channel Multiple Extensions Development Board”
You must be logged in to post a review.
You may also like…
-
Displays, Electronic Components, OLED Display
2.32 cm (0.91 inch) I2C/IIC 128×32 Serial 4-Pin OLED Display Module
Displays, Electronic Components, OLED Display2.32 cm (0.91 inch) I2C/IIC 128×32 Serial 4-Pin OLED Display Module
- Size: 0.91 inch
- Resolution: 128 x 32
- Controlling Chip: SSD1306
- Display Area: 22.384 x 5.584mm
- Driving Voltage: 3-5V
- Operating Temperature: -40~70 celsius
- Interface Type: IIC
- Light Color: White
SKU: TAF5-004 -
Related products
-
Electronic Components, Miscellaneous components
PAM8403 5V Two-channel Stereo Mini Class-D 3W+3W Audio Amplifier Original Quality
Electronic Components, Miscellaneous componentsPAM8403 5V Two-channel Stereo Mini Class-D 3W+3W Audio Amplifier Original Quality
The PAM8403 is a 3W, class-D audio amplifier. It offers low THD+N, allowing it to achieve high-quality sound reproduction. The new filterless architecture allows the device to drive the speaker directly, requiring no low-pass output filters, thus saving system cost and PCB area.
With the same numbers of external components, the efficiency of the PAM8403 is much better than that of Class-AB cousins. It can extend the battery life, which makes it well-suited for portable applications.
SKU: TAF6-005 -
Electronic Components, IoT & Wireless Boards
Ai Thinker A9G GSM/GPRS+GPS/BDS Development Board Original Quality
Electronic Components, IoT & Wireless BoardsAi Thinker A9G GSM/GPRS+GPS/BDS Development Board Original Quality
A9G GSM/GPRS+GPS Modules is a quad-band GSM/GPRS module based on RDA8955 SoC and comes with 29 GPIOs and an integrated SDK. These modules support the basic phone voice call/SMS, serial to GPRS, and GPS data transmission functions which can be used in a wide range of applications. The A9G modules allow users to make a voice call, use SMS services, and access the internet and base position with only a 2G SIM card. These modules operate at -20°C to 70°C temperature range. Applications include IoT, vehicle-mounted equipment, remote localization, and electric power environment monitoring.
SKU: TAF7-004 -
Electronic Components, IoT & Wireless Boards, Microcontroller Boards
NodeMCU ESP8266 development Board (CP2102)
Electronic Components, IoT & Wireless Boards, Microcontroller BoardsNodeMCU ESP8266 development Board (CP2102)
NodeMCU ESP8266 is an open-source Lua based firmware and development board specially targeted for IoT based applications. It includes firmware that runs on the ESP8266 Wi-Fi SoC from Espressif Systems and hardware which is based on the ESP-12E module, and like this, it can also be programmed using Arduino IDE and can act as both WiFi Hotspot or can connect to one.
SKU: TAF3-002 -
Electronic Components, Sensors
BMP180 Barometric Pressure Sensor Module compatible with Arduino
- 1.8V to 3.6V Supply Voltage
- Low power consumption – 0.5uA at 1Hz
- I2C interface
- Max I2C Speed: 3.5Mhz
- Very low noise – up to 0.02hPa (17cm)
- Fully calibrated
- Pressure Range: 300hPa to 1100hPa (+9000m to -500m)
SKU: TBF4-003
There are no reviews yet.