Soldering Paste Flux – 15 gm

Description
Get cleaner, stronger solder joints with our soldering flux paste, an essential for every electronics workbench. Applied to a joint before soldering, the paste removes oxidation from copper pads and component leads so molten solder flows smoothly and bonds properly. It comes in a compact screw-cap jar that keeps the paste fresh and easy to carry.

Specifications:

• Type: Soldering flux paste
• Form: Paste
• Colour: Amber / brown
• Net Weight: 15 g
• Container: Round plastic jar with screw-cap lid
• Application: Hand soldering with a soldering iron

About This Flux Paste
Solder doesn’t stick well to oxidised metal. Flux cleans the surface as it heats up, helping solder wet the joint instead of balling up. That makes this paste especially useful for tinning wires, soldering onto old or oxidised pads, reworking joints and soldering components that don’t take solder easily.

Key Characteristics

1. Better Solder Flow: Helps solder spread evenly for smooth, shiny joints.
2. Removes Oxidation: Cleans copper pads, wires and leads as it heats.
3. Easy to Apply: Just dip a toothpick, brush or iron tip and apply to the joint.
4. Compact Jar: The screw-cap lid keeps the paste clean and prevents drying.

How to Use

1. Apply a small amount of paste to the joint or wire.
2. Heat the joint with your soldering iron and feed in solder.
3. After soldering, wipe off leftover flux with isopropyl alcohol (IPA) and a brush.

Applications

• Tinning wires and cable ends
• Through-hole PCB soldering and repair
• Rework and re-soldering old joints
• Soldering battery tabs, terminals and connectors

Note:

• Product images may vary slightly in size and colour.
• Always clean flux residue after soldering for long-term reliability.
• Use in a well-ventilated area and avoid inhaling fumes.
• Keep the lid closed when not in use and store away from heat.