BLE Remote Using Xiao Esp32 C3
2 in stock
This BLE/WiFi Remote can be programmed for multiple use casesÂ
- To change slides during a presentation
- To scroll pages of the website.
- To change reels in Instagram.
- To like reels on Instagram.
- Play/Pause Music
- Increase/decrease vol of music.
- To Control home appliances.
₹1,524.58 ₹1,694.92
2 in stock
Compare-
Projects For Sale, Misc Projects
BLE Remote Using Xiao Esp32 C3
This BLE/WiFi Remote can be programmed for multiple use casesÂ
- To change slides during a presentation
- To scroll pages of the website.
- To change reels in Instagram.
- To like reels on Instagram.
- Play/Pause Music
- Increase/decrease vol of music.
- To Control home appliances.
SKU: TCF2-003 -
Our BLE Remote is built using XIAO C3 Microcontroller, the XIAO C3 is a tiny yet powerful microcontroller from Espressif. It has a build in Bluetooth and Wifi. The Remote is designed in such a way that it can be used as a mouse as well as a keyboard And also can be programmed to make a remote for controlling our other home automation products. It has five buttons and an RGB led which indicates a lot of info. The device has a built-in battery. It is a rechargeable remote. In addition to that the microcontroller has a built-in battery charging circuit.
This BLE Remote Kit Contains Of
- Seeed Studio XIAO ESP32C3 x1
- 330Ω SMD Resistors (0805 or 1206) x3
- RGB SMD LED (5050) x1
- Push Button(6x6x9.5) x5
- Slide Switch (8.6mm) x1
- PCB x1
- Battery x1
- 3D Printed Case x1
Hardware Overview of BLE Remote
| Weight | 0.030 kg |
|---|---|
| BLE Remote Variations | Without 3D Printed Case, With 3D Printed Case |
| HSN Code | 85423100 |
Based on 1 review
Add a review
You must be logged in to post a review.
Related products
-
Home Automation Project, Projects For Sale
Smallest Home Automation Project Using ESP-01 And ShiftRegister
Home Automation Project, Projects For SaleSmallest Home Automation Project Using ESP-01 And ShiftRegister
This Is our smallest home automation project that is capable of controlling up to 4 AC appliances and also able to control the speed of 1 AC Fan with a Capacitive fan dimming method by just using an ESP01 WiFi module. This project will come with all the components already soldered on the PCB along with ESP-01Â which you need to program as per your choice of IoT Platform.
SKU: TCF1-002 -
Projects For Sale, USB to TTL Programmers
Universal TTL Auto Programmer
This single programmer will help you to program multiple microcontroller chips/boards. This board got dedicated slots for programming
- ESP32 Cam Board
- ESP32/ESP8266 ChipÂ
- Arduino Pro mini
Along with that, it also got a dedicated pinout of a regular TTL programmer using which you can program almost all the microcontroller chips. This simplifies the programming of the Microcontroller significantly since no manual reset and boot mode selection is needed when using with a common USB to serial interface. It’s a must have tool for all IOT and Electronics Engineers.
SKU: TCF3-003 -
-
Electronic Components, IoT & Wireless Boards, Microcontroller Boards
TTGO T-Call V1.4 ESP32 Wireless Module SIM Antenna SIM Card SIM800L Module Unsoldered
Electronic Components, IoT & Wireless Boards, Microcontroller BoardsTTGO T-Call V1.4 ESP32 Wireless Module SIM Antenna SIM Card SIM800L Module Unsoldered
- Chipset :ESPRESSIF-ESP32 240MHz Xtensa® single-/dual-core 32-bit LX6 microprocessor
- FLASH: QSPI flash 4MB / PSRAM 8MB
- SRAM:520 kB SRAM
- Button: Reset
- USB to TTL: CP2104
- Modular interface: UART,SPI,SDIO,I2C,PWM,TV PWM,I2S,IRGPIO
- On-board clock:40MHz crystal oscillator
- Working voltage:2.7V-3.6V
- Working current: About 70mA
SKU: ESP-1007
gjreditor (verified owner) –
I bought this long ago and the build is still good. I used this setup for other projects too. I had problem in uploading code which was solved immediately when contacted via whatsapp.
gjreditor –