5V Voltage Regulator IC | L7805CV
- IC Package: TO-220
- Type: Linear Voltage Regulator
- Fixed output voltage: 5V
- Max Output current: 1 A
- Maximum DC input voltage: 35V, Dropout voltage: 2V
₹8.47 (Exc. GST)
CompareAbout 7805 Voltage Regulator IC
The 7805 regulator is a fixed output, three terminal precision positive voltage regulator in 3 pins TO-220 package. This 7805 regulator can provide local on-card regulation by eliminating distribution problems associated with single point regulation. The 7805 fixed voltage regulator is designed with thermal overload protection that shuts down the circuit when subjected to an excessive power overload condition, internal short circuit protection that limits maximum current the circuit will pass and output transistor safe area compensation that reduces the output short circuit as the voltage across the pass transistor is increased.
Specifications:
| Input voltage | 7v to 25v |
| Output voltage range | 4.8 v to 5.2v |
| Typical output voltage | 5v |
| Maximum output current | 1.5A |
| Dimensions | 30 x 10 x 5 mm |
| Weight | 2g |
Pinout
Looking for other Voltage Regulator ICs? Well check them out by clicking here.
Note: Image may vary from actual product in terms of Manufacturer/Brand name according to the availability.
| Weight | 0.001 kg |
|---|---|
| HSN Code | 85423100 |
Based on 0 reviews
Related products
-
Electronic Components, Festive Offer, IoT & Wireless Boards, Microcontroller Boards
ESP32 Development Board | Doit DevKit V1 | powerful Wroom32 module
Electronic Components, Festive Offer, IoT & Wireless Boards, Microcontroller BoardsESP32 Development Board | Doit DevKit V1 | powerful Wroom32 module
1) Ultra-low-power management.
2) 4 MB Flash.
3) Current: 80 mA.
4) Supply Voltage: 2.2 V ~ 3.6 V.
5) Data Rate: 54 Mbps.
6) Frequency: 2.4 GHz.SKU: TAF7-001 -
Electronic Components, Motors & Motor Drivers
L293D Motor Driver Shield for Arduino
- 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
- 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, and internal kickback protection diodes.
- Can run motors on 4.5VDC to 25VDC.
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, or interleaved stepping.
SKU: TDF6-002 -
Electronic Components, Festive Offer, Sensors
DHT11 Temperature and Humidity Sensor Module
DHT11 is a low-cost digital sensor for sensing temperature and humidity. This sensor can be easily interfaced with any micro-controller such as Arduino, Raspberry Pi etc to measure humidity and temperature instantaneously.
SKU: TAF6-001 -
Electronic Components, Festive Offer, Relays
Hongfa HF46F 5A SPST 5V PCB Sealed Subminiature Intermediate Power Relay(Pack of 5)
Electronic Components, Festive Offer, RelaysHongfa HF46F 5A SPST 5V PCB Sealed Subminiature Intermediate Power Relay(Pack of 5)
Features
- 5A switching capability
- Meets VDE 0700, 0631 reinforce insulation
- Highly efficient magnetic circuit for high sensitivity: 200mW
- Extremely small footprint utilizing PCB area
SKU: TDF4-003
There are no reviews yet.