16×2 LCD Display Green Backlight
This is a basic 16-character by 2-line Alphanumeric display. Black text on Green background. Utilizes the extremely common HD44780 parallel interface chipset. Interface code is freely available. You will need a Minimum of 6 general I/O pins to interface to this LCD screen. Includes LED backlight. Works in 4-bit and 8-bit Modes.
₹78.81 ₹93.22
-
Displays, LCD Display
16×2 LCD Display Green Backlight
This is a basic 16-character by 2-line Alphanumeric display. Black text on Green background. Utilizes the extremely common HD44780 parallel interface chipset. Interface code is freely available. You will need a Minimum of 6 general I/O pins to interface to this LCD screen. Includes LED backlight. Works in 4-bit and 8-bit Modes.
SKU: TDF4-001 -
Displays, Electronic Components, LCD Display
I2C Module for 16×2 (1602) Character LCD
- 5V power supply.
- Serial I2C control of LCD display using PCF8574.
- Backlight can be enabled or disabled via a jumper on the board.
- Contrast control via a potentiometer.
- Can have 8 modules on a single I2C bus (change address via solder jumpers)address, allowing.
SKU: TAF3-005
About 16×2 LCD Display Green Backlight
This is LCD1602 Parallel LCD Display that provides a simple and cost-effective solution for adding a 16×2 Black on RGB Liquid Crystal Display to your project. The display is 16×2 LCD display that has a very clear and high contrast black text upon a Gray background/backlight.
This is a great Gray backlight LCD display. It is fantastic for Arduino-based projects. This LCD1602 Parallel LCD Display with Gray Backlight is very easy to interface with Arduino or Other Microcontrollers.
The values shown on the display can be either simple text or numerical values read by the sensors, such as temperature or pressure, or even the number of cycles that the Arduino is performing
Pin Diagram
Important Links
| Weight | 0.033 kg |
|---|
- 16 Characters x 2 Lines
- Green Backlight
- 5×7 Dot Matrix Character + Cursor
- HD44780 Equivalent LCD Controller/driver Built-In
- 4-bit or 8-bit MPU Interface
- Standard Type
- Works with almost any Microcontroller
Related products
-
Displays, LED Matrix Display
MAX7219 LED Dot Matrix 4 In 1 Display with 5P Line Module
- Requires only 3 communication wires of MCU
- Pre-cascaded MAX7219 Dot Matrix LED Module.
- The overall size of the display is very compact
- The PCB features M3 holes for mounting.
- Module with input and output interfaces
- Support for cascading multiple modules
- Quite large display
SKU: TDF7-002
