fbpx
-4%

16 Channel 5V Relay Module with Optocoupler


  • Working voltage: 5 Volts
  • Maximum Current: 500 mA
  • Low State Voltage: 0 – 0.5 volts (Relay is ON)
  • High State Voltage: 3.7 to 5 volts  (Relay is OFF)
  • Number of Channel: 16
  • Dimension: 180 x 90 x 20mm (L x W x H)
  • Weight: 100 g

487.00 508.47

Compare

About 16 Channel Relay Module

This is a 16 Channel 5V Relay Module with Optocoupler, Be able to control various appliances and other equipment with a large current. It can be controlled directly by Micro-controller (Arduino, 8051, AVR, PIC, DSP, ARM, MSP430, TTL logic).
This is 5V 16-Channel Relay interface board and each one of the individual relays needs 15-20mA Driver Current. The board features indication LED for Relay output status and the standard interface that can be controlled directly by many of widely used microcontrollers like Arduino etc.
The 5V electromechanical relay module with AC contact capacity of 250V which also include light coupling protection(optocoupler) for isolation of control circuitry. The plate load power module doesn’t need an external power supply. It supports all SCM Drive.

Features  :-

  • 5V relay with AC contact capacity of 10A 250V and optocoupler protection.
  • Onboard power supply module does not need an external power supply. I / O port driver is active low.
  • The module can be used as a microcontroller development board module and also as appliance control, PLC extended output.
  • It is using the industry’s top -quality isolation optocouplers, strong anti-jamming ability, stable performance.
  • The 1-16 road can be any full on/off or any road.
  • Each relay common terminal “COM” are independent, user-friendly access to different signals, each relay are normally closed and normally open with the port.
  • Each relay is equipped with motion lights.
  • All interfaces can be directly connected through the terminal leads, very convenient.

Specifications :-

  • Working voltage: 5 Volts
  • Maximum Current: 500 mA
  • Low State Voltage: 0 – 0.5 volts (Relay is ON)
  • High State Voltage: 3.7 to 5 volts  (Relay is OFF)
  • Number of Channel: 16
  • Dimension: 180 x 90 x 20mm (L x W x H)
  • Weight: 100 g

Instructions:-

  • The power supply should meet the scope of use, DC 5V.
  • The power supply cannot be reversed.
  • The load power should have a certain margin for the relay load. Avoid high power (about 2000W) and work for a long time, which will have a certain impact on product life.

Applications :-

  • Can be used as a microcontroller development board, can be used as home appliance control, can also be used as PLC expansion output.
SKU: TFF7-003 Category:

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “16 Channel 5V Relay Module with Optocoupler”

There are no reviews yet.