DS3231 RTC Module Precise Real Time Clock I2C AT24C32 without cell
- 1 Hz output pin SQW.
- 32 KHz output pin 32K.
- Voltage Supply: 2.2 V ~ 5.5 V (for RTC).
- Time Format: HH: MM: SS (12/24 hr).
- Date Format: YY-MM-DD-dd.
- DS 3231-based RTC with 2032 Battery Holder.
₹110.00 ₹118.64
About DS3231 RTC Module
DS3231 RTC Module is a Precise Real-Time Clock Module with 32Kbit EEPROM and a built-in 10-bit temperature sensor having a resolution of 0.25C.
The DS3231 RTC module Precise Real-Time Clock Module is a low-cost, extremely accurate I²C real-time clock (RTC) with an integrated temperature-compensated crystal oscillator (TCXO) and crystal. The device incorporates a battery input and maintains accurate timekeeping when the main power to the device is interrupted.
The integration of the crystal resonator enhances the long-term accuracy of the device as well as reduces the piece-part count in a manufacturing line. The ds3231 Arduino is available in commercial and industrial temperature ranges and is offered in a 16-pin, 300-mil SO package.
Note: Battery not included
Features:
- Two Time-of-Day Alarms.
- Digital Temp Sensor Output.
- Register for Aging Trim.
- DS 3231 RTC with 2032 Battery Holder.
- Highly Accurate RTC Completely Manages All Timekeeping Functions.
- Real-Time Clock Counts Seconds, Minutes, Hours, Date of the Month, Month, Day of the Week, and Year, with Leap-Year Compensation Valid Up to 2100.
- Configurable I2C device Address for AT24C32 using SMD jumpers on PCB (A0, A1, A2).
- Programmable Square-Wave Output Signal.
- Battery-Backup Input for Continuous Timekeeping.
- Low Power Operation Extends Battery-Backup Run Time.
- Voltage Supply for RTC: 2.2 V ~ 5.5 V
- Time and Date Format: Time: HH: MM: SS (12/24 hr).
Date Format: YY-MM-DD-dd. - Digital Temp Sensor Output: 10 bit, ±3°C Accuracy and 0.25C resolution.
Connection Diagram
Package Includes :
- 1 x DS3231 RTC Memory Module
| Weight | 0.006 kg |
|---|
Based on 0 reviews
Be the first to review “DS3231 RTC Module Precise Real Time Clock I2C AT24C32 without cell”
You must be logged in to post a review.
Related products
-
Electronic Components, Sensors
RC522 13.56MHZ RFID Reader Writer Module
- Voltage: DC 3.3V (Do not use 5V supply)
- Operating Current:13-26mA
- Idle Current:10-13mA
- Operating Frequency: 13.56MHz
- Highly integrated analog circuitry to demodulate and decode responses
- Supports ISO/IEC 14443 A/MIFARE
- Typical operating distance in reading/Write mode is up to 50 mm
SKU: TAF4-005 -
Battery, Electronic Components, Miscellaneous components
TP4056 1A Li-Ion Battery Charging Board Micro USB with Current Protection Good Quality
Battery, Electronic Components, Miscellaneous componentsTP4056 1A Li-Ion Battery Charging Board Micro USB with Current Protection Good Quality
- Dimension: 25 x 19 x 10 (LxWxH)mm.
- Input interface: micro USB.
- Current Protection: Yes
- Charging mode: Linear charging.
- Current: 1A adjustable.
- Charge precision: 1.5%.
- Input voltage: 4.5V-5.5V.
- Full charge voltage: 4.2V.
SKU: TAF4-008 -
Electronic Components, Sensors
DHT11 Temperature and Humidity Sensor Module
DHT11 is a low-cost digital sensor for sensing temperature and humidity. This sensor can be easily interfaced with any micro-controller such as Arduino, Raspberry Pi etc to measure humidity and temperature instantaneously.
SKU: TAF6-001 -
Electronic Components, Miscellaneous components
MP3-TF-16P MP3 Disk TF Card Module
It’s a small and low-cost MP3 module player with a simplified output directly to the speaker. It can be used as a stand-alone module with an attached battery, speaker, and push buttons or used in combination with an Arduino UNO or any other with RX/TX capabilities.This perfectly integrates the hard decoding module, which supports common audio formats such as MP3, WAV, and WMA. Besides, this module also supports TF card with FAT16, FAT32 file system. Through a simple serial port, you can play the designated music without any other tedious underlying operations.SKU: TBF5-003
There are no reviews yet.