Microcontroller Boards
Showing all 10 results
-
Electronic Components, Microcontroller Boards
Arduino Nano V3.0 Development Board – Clone Compatible Model
Electronic Components, Microcontroller BoardsArduino Nano V3.0 Development Board – Clone Compatible Model
- Operating Voltage (logic level): 5V
- With Soldered Connector
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
SKU: ARD-102 -
Electronic Components, Microcontroller Boards
Arduino Uno R3 SMD Atmega328P Board – Clone Compatible Model
Electronic Components, Microcontroller BoardsArduino Uno R3 SMD Atmega328P Board – Clone Compatible Model
- Microcontroller ATmega328 (SMD) – Interface CH340G
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 5-20V
- Digital I / O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
SKU: ARD-101 -
Electronic Components, IoT & Wireless Boards, Microcontroller Boards
ESP-01 ESP8266 Wifi Serial Module For IOT
Electronic Components, IoT & Wireless Boards, Microcontroller BoardsESP-01 ESP8266 Wifi Serial Module For IOT
The ESP8266 WiFi Module is a self-contained SOC with an integrated TCP/IP protocol stack that can give any microcontroller access to your WiFi network. The ESP8266 is capable of either hosting an application or offloading all Wi-Fi networking functions from another application processor. This module comes with AT commands firmware which allows you to get functionality like Arduino wifi shield, however, you can load different firmware to make your own application on the modules’ memory and processor. It’s a very economic module and has huge and growing community support.
SKU: ESP-1005 -
Microcontroller Boards, Electronic Components
ESP32 WROOM 32D Module Authentic Quality
Specifications
- ESP32-Wroom-32D-N4
- Wifi Protocols: 802.11 b/g/n
- Wi-Fi+BT+BLE MCU Module
- Integrated Cyrstal of 40 Mhz
- Integrated SPI Flash of 4 MB
- Recommended Voltage: 3.3V
- Operating Current: Average 80 mA
SKU: ESP-1008 -
Electronic Components, IoT & Wireless Boards, Microcontroller Boards
NodeMCU ESP8266 development Board (CP2102)
Electronic Components, IoT & Wireless Boards, Microcontroller BoardsNodeMCU ESP8266 development Board (CP2102)
NodeMCU ESP8266 is an open-source Lua based firmware and development board specially targeted for IoT based applications. It includes firmware that runs on the ESP8266 Wi-Fi SoC from Espressif Systems and hardware which is based on the ESP-12E module, and like this, it can also be programmed using Arduino IDE and can act as both WiFi Hotspot or can connect to one.
SKU: ESP-1002 -
Electronic Components, IoT & Wireless Boards, Microcontroller Boards
Seeed Studio XIAO ESP32C3
Seeed Studio XIAO ESP32C3 featuring ESP32C3 carries a complete Wi-Fi system along with Bluetooth Low Energy function. With its exquisite design, WiFi+BT ability, it’s perfect for various IoT controlling scenarios and complex carriable applications.
SKU: ESP-1006 -
Electronic Components, IoT & Wireless Boards, Microcontroller Boards
TTGO T-Call V1.4 ESP32 Wireless Module SIM Antenna SIM Card SIM800L Module Unsoldered
Electronic Components, IoT & Wireless Boards, Microcontroller BoardsTTGO T-Call V1.4 ESP32 Wireless Module SIM Antenna SIM Card SIM800L Module Unsoldered
- Chipset :ESPRESSIF-ESP32 240MHz Xtensa® single-/dual-core 32-bit LX6 microprocessor
- FLASH: QSPI flash 4MB / PSRAM 8MB
- SRAM:520 kB SRAM
- Button: Reset
- USB to TTL: CP2104
- Modular interface: UART,SPI,SDIO,I2C,PWM,TV PWM,I2S,IRGPIO
- On-board clock:40MHz crystal oscillator
- Working voltage:2.7V-3.6V
- Working current: About 70mA
SKU: ESP-1007