Search results: “type c”
Showing 1–24 of 52 results
-
Batteries, Electronic Components, Miscellaneous components, Power Supply
TP4056 Type C 1A Li-ion lithium Battery Charging Module With Current Protection Good Quality
Batteries, Electronic Components, Miscellaneous components, Power SupplyTP4056 Type C 1A Li-ion lithium Battery Charging Module With Current Protection Good Quality
- Input interface: Type C
- Current Protection: Yes
- Charging mode: Linear charging.
- Current: 1A adjustable.
- Charge precision: 1.5%.
- Input voltage: 4.5V-5.5V.
- Full charge voltage: 4.2V.
SKU: BMS-4002 -
USB to TTL Programmers
Universal TTL-Programmer Version-2 With TYPE-C Socket
This single programmer will help you to program multiple microcontroller chips/boards. This board got dedicated slots for programming
- ESP32 Cam Board
- Arduino Pro mini Board
- ESP-01 Board
- ESP32 Module (Extension PCB Required)
- ESP8266 12 Module (Extension PCB Required)
Along with that, it also got a dedicated pinout of a regular TTL programmer using which you can program almost all the microcontroller chips. This simplifies the programming of the Microcontroller significantly since no manual reset and boot mode selection is needed when using with a common USB to a serial interface. It’s a must-have tool for all IOT and Electronics Engineers.
SKU: PROG-1002 -
Electronic Components, Miscellaneous components
4×4 Matrix Membrane Type Keypad Switch for Arduino, ARM and other MCU -16 Keys
Electronic Components, Miscellaneous components4×4 Matrix Membrane Type Keypad Switch for Arduino, ARM and other MCU -16 Keys
- Ultra-thin design & adhesive backing provides easy integration to any project
- Excellent price-performance ratio
- Easy communication with any microcontroller
- 5 pins 2.54mm pitch connector, 4x 4type 16 keys.
- Sticker can peel off for adhesive mounting.
- Operating Voltage (V): 12 DC
SKU: MISC-11009 -
Projects For Sale, Home Automation Project, IoT Projects
All in One Home Automation Project V3 (With CADIO Firmware)
Projects For Sale, Home Automation Project, IoT ProjectsAll in One Home Automation Project V3 (With CADIO Firmware)
Specification & Features
- Control 4 AC Appliances ( Max Rating 5A at 240V AC)
- 4 Speed Fan Control
- Built-In Temperature & Humidity Sensor
- IR Remote Control
- RF Remote Control
- Powered by ESP32
- Type C Port for programming
- Works with Cadio (but programmable for any cloud platfrom)
- Manual Switch and Manual Fan regulator control
SKU: PROJHA-1004 -
Projects For Sale, Home Automation Project, IoT Projects
All in One Home Automation V3
Specification & Features
- Control 4 AC Appliances ( Max Rating 5A at 240V AC)
- 4 Speed Fan Control
- Built-In Temperature & Humidity Sensor
- IR Remote Control
- Powered by ESP32
- Type C Port for programming
- Works with ESPRainmaker, Alexa, Google Assistant
- Manual Switch and Manual Fan regulator control
- Last State can be stored
- Totally Programmable
SKU: PROJHA-1003 -
Projects For Sale, USB to TTL Programmers
Smallest TTL Programmer
This smallest programmer will help you to program multiple microcontroller chips/boards.This programmer has a regular TTL programmer using which you can program almost all the microcontroller chips and also dedicated EN and IO0 pins which will help you to program ESP chips automatically without pressing Reset or Boot button. It’s a must have tool for all IOT and Electronics Engineers.
SKU: PROG-1003 -
Tools, Soldering/Desoldering Equipments
Wire Cutter 07
- H-1 cm L-12cm W-50 gm.
- A versatile Wire Cutter tool for cutting copper and aluminum conductors from 0.8mm to 1.2mm.
- Made out of high-grade alloy steel with black oxide finish heat treated to 60 HRC on cutting edges.
- Suitable for dressing components on printed circuit boards.
- Handles made out of high-grade ABS plastics.
SKU: T-2007 -
Tools, Soldering/Desoldering Equipments
Solder Iron Stand sp-7 Strong & Reliable
- This is a Sonal SP-7 Soldering Iron Stand with a heavy-duty metal base.
- Robust and powerful base to uphold the weight of soldering irons varying from 30w, 35w, 40w, 50w, 60w and 75w.
- The nickel-plated wide spring holder.
- The wide spring holder provides plentiful room for holding the soldering Iron support.
SKU: T-2009 -
-
Electronic Components, Sensors
20A Range Current-Sensor Module ACS712 Good Quality
- Low-noise analog signal path
- Device bandwidth is set via the new FILTER pin
- 5 µs output rise time in response to step input current
- Small footprint, low-profile SOIC8 package
- 2.1 kVRMS minimum isolation voltage from pins 1-4 to pins 5-8
- Supply Voltage: 4.5V~5.5V DC
- Measure Current Range: 20A
- Sensitivity: 100mV/A
SKU: S-6019 -
Electronic Components
NEO-6M GPS Module with EPROM Best Qu
- 5Hz position update rate.
- The cold start time of 38 s and the Hot start time of 1 s.
- Configurable from 4800 Baud to 115200 Baud rates. (default 9600).
- SuperSense ® Indoor GPS: -162 dBm tracking sensitivity.
- Support SBAS (WAAS, EGNOS, MSAS, GAGAN).
- Separated 18 x 18mm GPS antenna.
SKU: MISC-11021 -
Sensors, Electronic Components
MQ 135 Air Quality/Gas Detector Sensor Module For Arduino
- Sensitivity to Ammonia, Sulphide, and Benzene steam
- Sensitive for benzene, alcohol, smoke
- Fast response and recovery
- Adjustable sensitivity
- Signal output indicator
- Output voltage boosts along with the concentration of the measured gases increases.
SKU: S-6016 -
Sensors, Electronic Components
LM393 Photosensitive Light-Dependent Control Sensor LDR Module
- LDR module 4 PIN
- Operating voltage 3.3V-5V
- Signal output indicator light.
- LDR module 4 PIN
- Able to detect ambient brightness and light intensity Adjustable sensitivity (via blue digital potentiometer adjustment)
SKU: S-6017 -
Home Automation Project, IoT Projects
Universal IR Blaster
Specification:-
- Works on 5v Supply
- Can be powered using Type-C or Micro-USB Cable (Depending on the Variation Purchased)
- Consist of 5 IR LEDs For best Communication.
- Consists of IR Reciever For learning IR Remote Data.
- Comes With Pre-Installed CADIO Firmware
- Dimensions in mm(LBH) :-45x33x26
SKU: PROJHA-1007 -
Mechanical Switches, Electronic Components
12x12x12mm Tactile Push Button Switch-10Pcs.
- Through-hole design.
- Shaft Shape: Round
- Function: Push to ON
- High operating force (3.0N or 3.6N) suited to automotive equipment requirements
- The long life of 300,000 cycles was realized despite the high operating force
- Middle stroke (1.05mm)
SKU: MISC-11015 -
Electronic Components, IoT & Wireless Boards
LILYGO®TTGO T-Higrow ESP32wroom WiFi And Bluetooth Battery And DHT11 Soil Temperature And Humidity Photometric Electrolyte Sensor Fantastic Quality
Electronic Components, IoT & Wireless BoardsLILYGO®TTGO T-Higrow ESP32wroom WiFi And Bluetooth Battery And DHT11 Soil Temperature And Humidity Photometric Electrolyte Sensor Fantastic Quality
- Working current:150 mA
- Sleep current: 220 uA
- Working temperature range:-40℃ ~ +85℃
- Power Supply Input:USB 5V/1A
- Charging current:500mA
- Battery Input:3.7-4.2V
- Battery:3.7V lithium battery
SKU: ESP-1010
